Regenerative catalyst oxidizer (RCO)
Brand Baina
Product origin Jiangsu Yixing, China
Delivery time 8 weeks
Supply capacity 10 sets/month
1. Suitable for treating VOCs with a certain volume and concentration, adiabatic temperature rise of VOCs is less than 300 ℃.
2. Removal efficiency is no less than 98%.
1. Working principle
Put certain number of catalyst on top of ceramic in T-RTO, waste gas is preheated to 300~350°C by ceramic, then come into catalytic oxidation chamber to be decomposed by catalyst, hot exhaust exchange its heat to ceramic other tank and is cooled down then emission out.
2. Application
(1) The composition of VOCs can not be complex, can not contain halogen, sulfur, phosphorus and dust.
(2) Concentration of waster gas can not be high, in other words the thermal insulation temperature rise is less than 300°C.
(3) Heat recovery method: Steam, hot water, hot conduction oil and hot air.
(4) The following information should be provided while consulting: volume, temperature, pressure, composition, concentration for each factor.
Factory Show
Depending on the Volume, composition, and concentration of the VOCs,if the volume is small (normally less than 10000Nm3/h) and concentration is high(Calorific value is more than 1000Kcal/Nm3), then the first choice is thermal oxidizer(TO). If the volume is large(more than 5000m3/h) and concentration is small (normally less than 5000mg/m3),then regenerative thermal oxidizer will be considered. If t...more
