Flammable gas analyzer
1. Improve the safety of organic waste gas in the process of treatment.
2. Primary means of explosion control.
1. Working principle
Directly measured by flame ionization (FID) + flame temperature sensing (FTA) technique
2. Performance parameters
(1). Response time < 1s.
(2). Provides consistent and reliable data even in the face of multiple or changing solvent concentrations.
(3). Designed with multiple fail-safe features.
(4). No poisoning or contamination.
(5). Range: 0 ~ 100% Low Explosive Limit (LEL).
(6). Operating temperature: sensor heated to 220 ° C.
(7). Gas consumption: 60 L hydrogen per day.
(8). Rated voltage: 110 ~ 240VAC, 50/60Hz (customizable).
(9). Compressed air: 40Psig, conventional clean air.
(10). Communication: 1 ~ 4 independent optical isolated signals, 4 ~ 20 mA (load resistance ≤ 500Ω).
s
Factory Show
Depending on the Volume, composition, and concentration of the VOCs,if the volume is small (normally less than 10000Nm3/h) and concentration is high(Calorific value is more than 1000Kcal/Nm3), then the first choice is thermal oxidizer(TO). If the volume is large(more than 5000m3/h) and concentration is small (normally less than 5000mg/m3),then regenerative thermal oxidizer will be considered. If t...more
